***Please, if you do use these instructions, I would love it if you would post a comment with a link to your picture so that I can see your work. It would really make me happy! Happy stitching!**
I promised my friend Amanda to try to make some instructions on how to finish these scissor cases. So last night, when I finally had finished the stitching part on Indigo Rose’s ‘Wildflower Hearts’ (freebie found here) I made it into a scissor case and took pictures of the progress. It was a lot of fun! So here goes, my first attempt at describing how I make anything! LOL! Wish me luck! And if you have any questions just ask and I will try to get back to you as soon as possible.
First you need your stitched piece and a piece of fabric of the same size (or slightly smaller, only by 2 stitches or so) for the inside. You need to backstitch (I use Pearl Cotton for backstitching and Whip stitching as it is stronger than regular floss) around your stitched piece, about 4 threads from the finished stitching. For instance, the white piece (the outside of the scissor case) is 82×82 backstitches and the pink piece (the inside of the scissor case) is 80×80 backstitches. Cut your fabric about 6-8 threads (it varies on the fabric you are using, some fabrics fray more than others) from the backstitched edge and trim the corners a little.
Press your pieces and fold the edges to the back of the pieces.
Start at a corner and stab your threaded needle under the first stitch on both pieces with the wrong sides together (the right side facing out) and pull your needle through. Go under the next stitches of both front and back piece and pull. This is called Whip Stitching.
Fold the next edge, be careful to press the corners with your fingers and continue whip stitching the backstitched edges together.
Before you close the squares up, be sure to attach ribbon so that you will be able to close your scissor case.
Next you need to stitch the edges on the front together to close it up and make the pocket that the scissors will stay in. Thread your needle, secure the end and start Whip Stitching these two edges also. You will be Whip Stitching the already Whip Stitched edges so it might get a little rough on your fingers. Be sure to pull on your thread to close it up nicely. Don’t pull too hard though :o)
Put the scissors in the pocket and close with the top flap. Measure where to attach your button and then sew it on in the correct spot.